Frames & Welded Structures
Welded frames, bases, space frames and load-bearing assemblies for equipment, production lines, machinery and process modules.
Metal fabrication from drawings or engineered to your technical requirements
Custom Metal Fabrication Services
We manufacture welded metal structures, frames, supports, platforms, stairs, guards and custom industrial assemblies. We work from drawings, 3D models or technical requirements, from one-off structures to repeat production.
Welding + machining within one production route
Fabrication from engineering drawings, assembly drawings and specifications
Kyiv, Ukraine · shipping of finished structures available
Metal Fabrication for Your ProjectCutting · preparation · welding · machining · inspection
Input dataDrawings · PDF · DWG · DXF · STEP · and other formats
Production formatOne-off & batch production
Welding processesMIG/MAG · TIG · MMAThe process is selected for the material, thickness and assembly requirements
MaterialsSteel · stainless · aluminumMaterial grade is agreed according to the technical documentation
Project dataDrawings / specifications / 3DSketches and technical requirements can also be reviewed
Production formatFrom one-off parts to repeat batchesThe production route and tooling are adapted to the order volume
What We Fabricate
Metal Fabrication for Industrial, Commercial and Construction Applications
We manufacture standard and custom metal structures from customer-supplied documentation. Before production, we review the intended use, loads, dimensions, material, joint types and required manufacturing operations. The main product groups we can consider for production are listed below.
Supports & Stands
Support structures, pedestals, brackets, posts, subframes and bases with mounting surfaces, holes and reinforcements.
Platforms & Work Areas
Process and service platforms, walkways, work areas, access platforms and auxiliary structures for equipment maintenance.
Embedded & Mounting Components
Embedded plates, plates, flanges, anchor and mounting elements, welded brackets and assemblies for subsequent installation.
Racks & Process Frames
Metal rack structures and frames for storage, transport or positioning of products, tooling and components.
Custom Welded Assemblies
Custom metal structures and assemblies from drawings, 3D models, sketches or technical requirements.
Fabrication Capabilities
From Raw Material to Finished Welded Assembly
Metal fabrication can include edge preparation, drilling, forming holes and slots, flange fabrication, machining of datum surfaces, assembly, welding and geometry inspection. The exact process is defined by the drawings and technical requirements.
01
Preparation of blanks from sheet, rectangular and round tube, angle, channel, beam and other metal stock
02
Cutting, drilling, forming mounting holes, chamfers, slots and other features according to the documentation
03
MMA, MIG/MAG and TIG welding, with the process selected for the material, thickness and joint requirements
04
Assembly in the specified sequence with control of datums, diagonals, relative positioning and mounting geometry
05
Turning and milling of individual parts or critical structural surfaces where accurate fits are required
06
Deburring, grinding, surface preparation and agreed finishing operations before shipment
07
Final inspection of dimensions, completeness and conformity with the approved engineering documentation
Production ProfileOperations Available Within One Order
Primary serviceWelded metal fabrication
Input dataDrawings / specifications / technical requirements / 3D
WeldingMIG/MAG · TIG · MMA
MachiningTurning · milling · drillingAs required for parts and datum surfaces
Material formsSheet · profile · tube · bar and structural stock
One-off productionYes
Repeat batchesYes
Customer-supplied materialSubject to approval
DeliveryAgreed based on shipment dimensions
Materials & Stock
Structural Materials Selected for Service Conditions
Material grade, thickness, profile and surface protection are agreed according to the technical requirements. If the structure operates under load, in a humid environment, outdoors or in contact with equipment, these conditions should be specified before production.
01Structural SteelSheet and structural stock for frames, supports, platforms, structures and welded assemblies.
02Stainless SteelFor structures requiring increased corrosion resistance or hygiene, including food-industry applications.
03Aluminum AlloysFor lightweight frames, housings and auxiliary structures, subject to review of the specific alloy and welding process.
04Rectangular & Round TubeFrames, posts, supports, guards, trusses and spatial structures.
05Sheet & PlateShelves, ribs, gussets, flanges, bases, embedded parts, covers and mounting elements.
06Angle, Channel & BeamLoad-bearing and support elements manufactured according to drawings and the structural design.
Send Drawings or Technical Requirements
Submit Project for a Quote
Our engineer will review the documentation, confirm the material, dimensions, quantity and required operations, and prepare the information needed for a quote.
Engineering Approach
Geometry Control & Design for Manufacturability
For frames, platforms and equipment assemblies, the accuracy of datum surfaces, mounting points, diagonals and relative positioning is critical. We define the assembly, welding and subsequent machining sequence before production to meet the drawing and installation requirements.
01Part locating and assembly sequence before welding
02Inspection of diagonals, planes, axes and mounting dimensions
03Allowance for welding distortion and stock for subsequent machining
04Machining of critical surfaces after welding, where required
For complex and critical structures, our engineer reviews the documentation, material, joint types, datum surfaces, allowable deviations and inspection methods. Where required, machining allowances and post-weld machining are built into the production route.
Key principleGeometry before and after welding
±Production Cycle
When a Structure Requires More Than Welding
Within one order, we can combine material preparation, welding and machining. This is useful for frames, bases, brackets and equipment assemblies where individual parts or surfaces require accurate fits and mounting geometry.
01 / Preparation
Cutting & Part Preparation
We prepare a complete set of blanks from drawings: profile, tube, sheet, plates, ribs, flanges and mounting elements.
02 / Assembly
Welding & Assembly
We assemble the structure in a defined process sequence while controlling datums and geometry. The welding process is selected for the material and requirements.
MIG/MAGTIGMMA
03 / Precision
Machining
We perform machining operations such as turning, milling, grinding and others on structural parts and critical surfaces where accurate fits, holes, planes or threads are required.
TurningMillingCNC
04 / Finishing
Inspection & Finishing
We verify dimensions and completeness, then carry out the agreed cleaning, grinding and surface preparation before handover. Inspection before and after coating* is performed when coating is specified in the technical requirements.
* The specific paint system, protective or decorative coating is agreed separately based on the material, service conditions and project requirements.
Pre-Shipment InspectionWe Check What Matters for Assembly and Performance
Quality Control
Geometry, welds, mounting points and completeness
Inspection criteria are defined by the engineering documentation and intended use. We verify key parameters at the appropriate production stages: material and completeness, assembly geometry, welded joints and readiness for shipment.
01
Input Data
We verify the material, drawings, specification, document revision and complete set of parts before assembly.
02
Assembly Geometry
We inspect overall dimensions, diagonals, relative positioning, mounting holes and datum surfaces.
03
Welded Joints
We visually inspect weld execution and conformity with the agreed process. Additional inspection methods are available when required by the project.
04
Final Inspection
Before handover, we verify critical dimensions, completeness, individual parts and readiness for the next stage.
Applications
Metal Fabrication for Industrial and Engineering Applications
We work on B2B projects where compliance with engineering documentation, installation compatibility, repeatability and agreed lead times matter. The production route is selected for the structure's purpose and the customer's technical requirements.
Industrial ManufacturingFrames, platforms, supports and welded assemblies for equipment and production lines.
Machinery & EquipmentSubframes, bases, welded housings and auxiliary assemblies for machinery.
Specialized SystemsFrames, platforms, housings and mounting elements for mobile systems, specialized equipment and machinery.
Logistics & WarehousingRack frames, guards, stands, transport frames and process structures.
Service & ModernizationNew structures and assemblies for equipment modernization based on customer-supplied data.
Commercial FacilitiesStairs, guards, frames, technical platforms and custom metal solutions.
How We Work
From Technical Requirements to Finished Metal Fabrication
01
Documentation
We receive drawings, engineering documentation, a 3D model, specification or initial sketch and confirm the intended use of the structure.
02
Engineering Review
We review the drawings for manufacturability, geometry and design datums, and define any required tooling or fixtures.
03
Quote
We define the production route and agree the scope of work, price, lead time and handover conditions.
04
Fabrication
We prepare the blanks, assemble and weld the structure, then perform the required machining and finishing operations.
05
Inspection & Shipment
We verify key parameters and completeness, then prepare the structure for pickup or delivery.
Cost Calculation
What Determines the Cost of Custom Metal Fabrication
For custom metal fabrication, cost depends on material requirements, the labor involved in preparation and welding, geometry requirements, machining, finishing processes and batch size. We provide an accurate quote after reviewing the documentation.
For an Accurate Quote
Send a drawing or sketch, approximate dimensions, material, quantity, coating requirements and service conditions. If some information is missing, our engineer will identify what is needed for an estimate.
01Material & StockSteel or alloy grade, profile, thickness, section and total material requirement.
02Dimensions & WeightAssembly dimensions affect handling, fixturing, packaging and logistics.
03Number of PartsThe amount of preparation, cutting, hole-making, positioning and assembly work.
04Welding ScopeJoint types, weld accessibility, material thickness and selected welding process.
05Geometry RequirementsDatums, mounting holes, relative part positions and distortion requirements.
06MachiningMilling, turning, drilling, threading or post-weld surface machining.
07Coating & FinishCleaning, grinding, painting or another agreed surface protection method.
08Batch Size & RepeatabilityOne-off item, small batch or repeat production from stable documentation.
Request a Quote
Send Drawings, Specifications or Technical Requirements
We will review manufacturability and confirm the material, dimensions, welded joints, machining, quantity, coating and other requirements for the finished structure.
Frequently Asked Questions
What to Know Before Ordering Custom Metal Fabrication
What information is required for a metal fabrication quote?
Ideally, provide an assembly drawing or engineering documentation, specification, material, quantity, welding requirements, coating requirements and critical dimensions. If full documentation is not available, send a sketch or technical brief with the main dimensions and intended use. After review, we will identify any missing information.
Can you fabricate a structure from a sketch or technical brief?
Yes. For an initial assessment, you can provide a sketch, technical brief or other available source information. If complete engineering documentation is required for production, we will define the necessary drawings, specifications and 3D data before the order is released.
What types of metal structures do you fabricate?
We consider frames, support structures, platforms, stairs, guards, embedded parts, process structures and custom welded assemblies. Final manufacturability depends on dimensions, weight, material, joint and inspection requirements, and the available production route.
What materials do you work with?
For metal fabrication, we work with structural and stainless steels as well as aluminum alloys subject to engineering review. The exact grade, material condition, thickness and stock form should be specified in the drawing or technical requirements.
What welding processes do you use?
We use MMA, MIG/MAG and TIG. The welding process is selected according to the material, part thickness, joint configuration and service requirements of the finished structure.
Can mounting surfaces or holes be machined after welding?
Yes, when this is included in the production route and the structure or its individual parts can be set up on suitable equipment. This is relevant for bases, flanges, mounting faces, threads, holes and other surfaces that require tighter geometry than welding and assembly alone can provide.
Do you accept one-off fabrication orders?
Yes. We handle both one-off and repeat orders. For a single item, a larger share of the cost may come from documentation preparation, fixturing, marking, assembly and process setup. For repeat batches, these costs are distributed across the production run.
Do you provide on-site installation?
This page is focused primarily on fabrication. If delivery, installation or on-site work is required, include it in your request. Availability and scope are agreed separately for each project.
What determines the lead time?
Lead time depends on documentation readiness, material availability, dimensions and complexity, part count, welding scope, machining and coating requirements, batch size and current production workload. The exact schedule is confirmed after engineering review.
Need a Quote for a Metal Fabrication Project?Send drawings, engineering documentation or a sketch to our engineer. We will review the production route and prepare a detailed quote.
Request a Quote